How To Make A Vintage Key Necklace DIY

A while back I posted some information on how to make necklaces with vintage and antique skeleton keys and since they are so popular I wanted to share those directions again for those who might have missed the original post and for those who have requested more information on how to make them. 

These directions are for how to make a necklace with a vintage key that is hung horizontally with a length of chain on each end of the key. 

What's fun about this project is that you can personalize your necklace by choosing your favorite color beads and gemstones to whatever you desire! That is the fun of designing; personalizing it however you like by being creative and experimenting and trying new things! 

I'm classifying this as a beginner project because there is really only one jewelry making technique that you need to know to create this necklace, and that is the wrapped loop. 
(you will find more info on how to make a wrapped loop below as you read on. I have included a link to directions for this technique for anyone who needs to lean it!)

Horizontally hung antique key necklace

Materials List 

Vintage Keys - most often found at flea markets and the like. You can also buy then on Etsy.com

 

  WD-40 and paper towels to clean up your keys and remove rust

 

  Coordinating wire: Brass or copper work well. For the necklaces shown, I used Beadalon ColourCraft Permanently Colored Copper Wire in Brown (20 gauge) and Zebra Wire Colored Copper Wire in Brown in 18, 22 and 26 gauge

 

Antique finish brass or copper chain 

  

Antique finish brass or copper jump rings 

 Antique finish brass or copper clasps 

        

A variety of gemstone and/or glass beads

Round nose pliers

Flush-cut pliers

Chain nose pliers

Before you begin:
If you find that your keys are a little rusty, spray them with WD-40 and clean well with paper towels. Because the keys I used were a nice, rusty brown, I decided to use brown colored copper wire for my necklaces. 



*NOTE: For this necklace you will need to know how to make a basic wrapped loop. This is a simple technique that is basic to jewelry making. It is easy to learn with just a little practice. If you do not know how to make a wrapped loop, directions can be found HERE


Directions

Step 1. Place key horizontally on table. Cut a 3� piece of wire and connect one end to the hole in the top of the key with a basic wrapped loop. (I used the 20 gauge wire).

   Step 2. Place a bead onto the other end of the wire and complete the end with another closed, wrapped loop.

   Step 3. Cut another 3� piece of wire and with a wrapped loop, connect one end to other, opposite end of the key, wrapping the wire around the body of the key to the inside of the key�s teeth.

   Step 4. Place a bead onto the other end of the wire and complete the end with another closed, wrapped loop.

Step 5. Continue this technique using 2.5� lengths of wire and beads, until you have the beaded look you want; In the photo above, you can see that I used three different beads on each end of the key. On the left side for the first beaded wrap that is attached to the key I put two turquoise beads together on that one wrap. On the next wrap attached to that one, I used one single bead. On the right side of the photo above, I did three wraps, each with one bead. You can do them however looks best to you! That is the fun part about designing. If you goof up, just snip your wire and cut a new piece and do it over again. *NOTE: Do NOT wrap the open end of the wire after your last bead on each end because that is where you will attach the chain (in the next step).

Step 6. Cut two lengths of chain (I used two 10� lengths of chain) and now making a loop in the wire after your last bead, thread the chain onto the loop and wrap the end. Repeat with other side. Your lengths of chain are now attached to each side of your necklace.

 Step 7. Attaching the clasp: At the end of each length of your chain you will attach your clasp. For this style necklace I used a basic lobster claw style clasp. Use a jump ring to attach the clasp to one side of your chain and complete the other side of your chain with another jump ring. You are finished!

Lobster-claw style clasp

A different color combination: Citrine and Honey Jade

Pink Rhodonite gemstone beads



If you have any questions, feel free to post them below. 

What do you think?



Pin this post!

How To Make Necklaces With Vintage Keys

In my last blog post I discussed my basic design process for working with a unique focal element, in this case, some fantastic vintage & antique keys that I came across at a flea market last summer. I also discussed the basics of choosing complimentary materials such as beads, and the �laying out,� or organization of the design. The following post will discuss the fabrication of those keys into a piece of unique, one of a kind piece of jewelry.

Below are two styles of necklaces made with keys:

Vertically Hung Key With Beaded Chain

Horizontally Hung Key Necklace

Materials List for both projects

Vintage Keys

WD-40 and paper towels to clean up your keys and remove rust

Coordinating wire: Brass or copper work well. For the necklaces shown, I used Beadalon ColourCraft Permanently Colored Copper Wire in Brown (20 gauge) and Zebra Wire Colored Copper Wire in Brown in 18, 22 and 26 gauge

Antique finish brass or copper chain (for horizontally hung necklace)

Antique finish brass or copper jump rings (for horizontally hung necklace)

Antique finish brass or copper clasps (toggle and or lobster-claw style)

A variety of gemstone and glass beads

Round nose pliers

Flush-cut pliers

Chain nose pliers

*Aside from the keys, most items listed above are available through Fire Mountain Gems Jewelry Supply http://www.firemountaingems.com/

FABRICATION

If you find that your keys are a little rusty, spray them with WD-40 and clean well with paper towels. Because the keys I used were a nice, rusty brown, I decided to use brown colored copper wire for my necklaces. I liked the keys hung both vertically and horizontally so I decided to make both styles. Below are the instructions for both.

Vertical Key Necklace: 
beaded chain technique with toggle clasp

*For these necklace you will need to know how to make a basic wrapped loop. This is a simple technique that is basic to jewelry making.If you do not know how to make a wrapped loop, directions can be found here: http://www.firemountaingems.com/beading_howtos/beading_projects.asp?docid=652t

Step 1. Cut a 2.5� piece of wire and connect one end to the hole in the top of the key with a basic wrapped loop. (For this style I used the 20 gauge wire)

Detail of wrapped wire loops attached to key

Step 2. Place a bead onto the other end of the wire and complete the end with another closed, wrapped loop.

Step 3. Repeat your next section with another section of 2.5� wire, this time connecting one end of the wire to the previously finished beaded loop. Again, place a bead on the wire, and complete the unfinished wire end with another wrapped loop.

Step 4. Continue repeating this �wire, bead, loop� process until you have created one entire side of beaded chain in the length that you desire. (I made each side of my necklace approx. 10�, for a total finished necklace length of 21� including key and clasp.)

Step 5. Repeat steps one through four to create the other side of your beaded chain.

Step 6. Attaching the toggle clasp: When you have finished your beaded chain in the length that you desire, attach your clasp. Using the same wrapped loop technique, attach the �bar� part of the toggle clasp to one side of your beaded chain and the �loop� part of the toggle clasp to the other side of your beaded chain. That's it! You are finished!

Detail of toggle clasp attached with wire wrapped loops

Directions for Horizontal Key Necklace:

Step 1. Place key horizontally on table. Cut a 3� piece of wire and connect one end to the hole in the top of the key with a basic wrapped loop. (For this style I used the 20 gauge wire).

   Step 2. Place a bead onto the other end of the wire and complete the end with another closed, wrapped loop.

   Step 3. Cut another 3� piece of wire and with a wrapped loop, connect one end to other, opposite end of the key, wrapping the wire around the body of the key to the inside of the key�s teeth.

   Step 4. Place a bead onto the other end of the wire and complete the end with another closed, wrapped loop.

Step 5. Continue this technique using 2.5� lengths of wire and beads, until you have the beaded look you want; I used two beads on one end of the key and four on the other end of the key. *Do NOT wrap the open end of the wire after your last bead.

Step 6. Cut two lengths of chain (I used two 10� lengths of chain) and now making a loop in the wire after your last bead, thread the chain onto the loop and wrap the end. Repeat with other side. Your lengths of chain are now attached to each side of your necklace.

 Step 7. Attaching the clasp: At the end of each length of your chain you will attach your clasp. For this style necklace I used a lobster claw style clasp. Use a jump ring to attach the clasp to one side of your chain and complete the other side of your chain with another jump ring. You are finished!

Lobster-claw style clasp

A different color combination: Citrine and Honey Jade

Pink Rhodonite gemstone beads

If you have any questions, feel free to post them below!

- Laura

My Design Process For Working With Unique Elements: Vintage Keys

The keys I found at Blue Mountain Flea Market...waiting to be made into something beautiful

MY DESIGN PROCESS FOR WORKING WITH UNIQUE ELEMENTS: VINTAGE KEYS

(Part 1: Designing with Unique Elements)

It�s been a while since I�ve updated my blog so I thought I�d share with you what I did with the vintage keys that I found this past summer at the Blue Mountain flea market (Saylorsburg, PA). I knew these keys were going to upcycled into something special, and it was going to be some type of neck or wrist jewelry.

Designing

When I�m creating a new design I usually start out by first choosing the main elements/materials. For instance, I might come across some outstanding gemstone beads that really appeal to me and usually the wheels will start turning right away about what other kinds of stones or materials they might work well with in a design.

Other times I�ll be working with some unique object, as in this case, the keys, and then my design process is a little bit different. When designing around one special, unique element, that element is known as your focal element, or focus of your design�the first thing that attracts your eyes�and you build your design around that.

My Design Process for Working With Unique Elements

Here is how I go about my design process: I usually will keep the item close to me on my workbench, and although I�m not yet using them or designing with them, I�m looking at them a lot and at that point, I just let them sort of sit in my mind and usually within a day or two I have a pretty good idea of what other materials I want to use with them and what type of design I am going to make with them. At this point, I�m looking at the keys and studying things such as their color, shape, size and texture.

When choosing my secondary materials in a design, I think about whether the materials will complement each other, and I also think about whether they will work together to make a whole�meaning, that when you look at the design, you experience a soothing aesthetic whole, as opposed to seeing something that is discordant, choppy, or awkward. Just like when you listen to a piece of music and you notice a wrong note � well the same goes with design too � you want your design to flow, and create a feeling of unity�sorta like music for your eyes.

After my secondary materials are chosen I lay everything out, and often moving pieces around like a jigsaw puzzle, will work on the design until I feel it is organized the way I like, and only then will I begin to fabricate it- put it all together!

Part 2: Fabrication of Necklaces Made with Antique Keys 

(�to follow soon)

Anybody see my keys?